Specifications

Configuring the Intellex
18 Intellex®
1 Exit from the Intellex system (refer to Exiting to Windows on page 17).
Caution
Exiting from the Intellex Ultra system will cause a complete loss of video.
2 Double click on the Composite Video Output Configuration icon.
You will see the following screen, allowing you to select the VACD3 output mode and VACD3
graphics overlay mode:
The VACD3 Output Mode menu allows you to set the composite output of the Intellex Ultra
system to one of three modes:
• Off - the VACD3 composite output is disabled (default mode)
• Live/Live only - the VACD3 composite output only displays live video when the main (VGA)
monitor is also displaying live video.
Note
Playback to monitor is not available on the Intellex Ultra system with VACD3 Output Mode set
as Off or Live/Live only.
• Full Operation - the VACD3 composite output is capable of displaying live video from the
active cameras or playback video. Refer to
Setting Up Display Settings on page 47 for details
of sending playback to the composite video output monitor.
Caution
Full Operation mode has a significant and serious effect on the performance of the Intellex Ultra system.
The VACD3 Overlay Mode menu allows you to either enable or disable viewing text overlay,
such as, date, time, camera name etc, on your monitor. The default is set as Off.
3 Select the appropriate VACD3 Output Mode.
4 Select the VACD3 Overlay Mode to either enable or disable graphics overlay.
5 Click OK to confirm your choice or Cancel to change your selection.