Specifications

Configuring the Intellex
Installation and Configuration Guide 33
Setting Up Light Change
1 From the Setup Options screen, click Schedule.
2 From the Camera 1-8 and 9-16 tabs, choose Day Filter > Light Change. Click Setup.
3 In the draw zone: click and draw the target area. The shape must form an enclosed boundary.
4 Adjust the sensitivity with the Sensitivity slider. Click Apply.
The filter allows only one detection area.
5 Repeat steps 2–4 for the Night Filter.
Setting Up Motion Exception
Motion exception searches for an event or activity by position, size, direction, and speed of a
moving object. For more information, see the User’s Guide.
1 From the Setup Options screen, click Schedule.
2 From the Camera 1-8 and 9-16 tabs, select Day Filter > Motion Exception. Click Setup.
3 From the Motion Exception screen, select the target area’s shape from the draw zone list.
4 Click and drag in the draw zone to form the target area. Custom shapes must form an enclosed
boundary.
You can select multiple areas; select a shape with each additional selection.
5 Set up additional target areas as needed for other Target Area Settings such as size, speed, or
direction, or a combination of settings.
Note
The target size must fit within the selection area.
6 To use the default settings for size, speed and direction:
a Draw target area(s).
b Click Test to try motion exception filters you configured. The Test Alarm radio button
illuminates when an object meeting your configuration criteria moves through the target
area.
Draw zone