Specifications

Configuring Anti-Virus Detection
56 Intellex®
9 The McAfee AV configuration tool for Intellex creates a new automatic update task only if you
have any automatic update tasks scheduled before running the Intellex AV module.
Note
Any previous user settings are reset. Schedule automatic updates during a period of low usage
to avoid losing frames of recorded video.
Configuring the Symantec Module
1 Install Symantec 8.1 AntiVirus Corporate Edition software.
2 Verify that it is installed on Intellex: the yellow shield icon must appear in the system tray.
If Symantec is not installed, an error message appears when you try to install it. The message
states that the anti-virus software was not detected and that you must install it.
3 Using a standard PC with Internet access, go to
http://americandynamics.net/software downloads/.
4 Select Intellex. In the Anti-Virus Software Configuration Tools section, find Symantec Anti-Virus
Configuration Tool for Intellex, download it to your hard drive, and copy it to a CD.
5 Exit Intellex to Windows.
6 Copy the CD to the Intellex desktop.
7 Run the software from your desktop and follow the installation instructions.
After successful installation, the Intellex About box updates in the Intellex application to: Intellex
AntiVirus Config 1.0 Symantec.
Note
If an Intellex 3.x system is undetected, an error message appears. The message states that the
configuration tool works only with for Intellex with Windows 2000.
The Symantec configuration tool makes these modifications to File System Realtime
Protection:
• Drive types network is disabled
• Exclude Selected Files and Folders is selected
• In Exclusions Dialog, Check file for exclusion before scanning is selected
• The exclusion file extensions AVI, DAT, and NDX are added
• Enables File System Real Protection is disabled.