Specifications

Intellex IP
Installation and Configuration Guide 73
4 Select either the AD 4 Channel or ADSDUIH (IPSDU8) from the IP Device Type drop-down list
followed by OK.
The Discover AD Devices screen will be displayed. All AD devices within the same subnet as
the Intellex IP are discovered and displayed in the list. The list will include previously
discovered and configured devices.
Note
If the device being added does not appear in the list, and is on the same subnet as the Intellex,
select Refresh. This will clear the list and rediscover the AD IP devices.
Note
If the device has not been configured, highlight it and then select Device Setup. A new browser
window will open displaying the Main Configuration Page For more information on configuring
either the IP Encoder or IPSDU8, refer to the IP Encoder Installation and User Guide or the
IPSDU8 Configuration and User Guide..
7 Highlight the device and select Add. The Configure AD Device screen will be displayed.
8 Go to step 12
If the device is on a different subnet it will not be detected by the discovery tool.
9 Select Skip Discovery.
The Configure AD Device screen is displayed enabling manual configuration of network
information and video stream parameters. The following screen illustrates the IP Encoder:
If Then go to
the device appears in the list of
discovered devices
step 7
the device is on a different
subnet
step 9