Instructions / Assembly

For any help, kindly consult the local distributor
Schematic drawing of case
Please do not keep emergency keys in your safe!
(FOR EGD\EBD\ED-N SERIES)
INTELLIGENT ELECTRONIC LOCK SAFE
Dear valued customer:
Thank you for choosing our products! You’ve taken an important step in
organizing and protecting your most valued possessions. Every series of our
safes is professionally made and designed to provide safety. Please take
time to read and familiarize yourself with the proper operating procedures of
your new safe presented on the following pages.
Again, thank you for choosing our products!
Schematic drawing of control panel
MOUNTING METHOD
● Fix the safe in the place which is not easy to move.
● Drill holes for expansion bolts (or clamping screws) in the right place.
● Turn the expansion bolts counter clockwise to separate.
● Use the expansion bolts (or clamping screws) to secure the case to the wall.
● Make sure the case is mounted in place as required and then tighten all screws.
1. Bolts
2. Reset Button
3. Battery Compartment
4. Knob(Master Key)
5. Emergency Lock Cover
6. Clear Key
7. Start & Conrming Button
8. Power Supply: 4 AA batteries
CAUTION:Use the expansion bolt when there is a concrete wall surface. Use the
clamping screw when there is a wooden wall surface.
12 3
Upon rst receipt of the safe, or either the electronic circuit malfunction or codes
unknown. You could also use the emergency key to open the safe.
● Remove the cover of the emergency lock.
●Insert the emergency key to the key hole, turn count clockwise, then turn the knob
(master key) clockwise to open the door.
OPENING THE SAFE IN EMERGENCY
SMS-00-EGD