Instructions / Assembly

● Turn the knob (master key) counter clockwise to close the door.
CLOSING DOOR
SETTING THE MASTER CODE
● With the door open, press “#” key to start the keypad, then press “0” key twice and
reset button once, the buzzer beeps twice and the LCD display will turn blue and show
“------”.
● Input your new user code(3-8 digits), and press the “#” key.
● The display will turn blue and read “IN”, then show your new code, which means the
setting is accepted successfully and you can use your safe box by new password.
● With the door open, press the reset button once, the buzzer beep once and the
LCD display will turn blue and show “------”.
● Input your new user code(3-8 digits), and press the “#” key.
● The display will turn blue and read “IN”, then show your new code, which means
the setting is accepted successfully and you can use your safe box by new password.
SETTING THE USER CODE
TAMPER ALARM
You may set a tamper alarm that will sound if anyone attempts to move or attack the
safe.
● Press the “*” key, the display will show ALERT ON.
● To turn alarm off, press the “#” key, the current code, and then the “#” key. If no code
is input to clear an alarm, the alarm will clear after 20 seconds and the safe will be
lock automatically for 3 minutes.
Your safe is equipped with a security display feature, using this feature means that
your code will not be displayed on screen when opening safe.
● Press “#” to startup the lock.
● Press “*” in touch screen to startup the hidden code function. Any code you input
will show “----“in the display, which can ensure your code safe.
● You can press “*” twice to cancel this function.
SECURITY DISPLAY FEATURE
OPENING DOOR
● Press the “#” key.
● Input your user code (3 to 8 digits), then press the “#” key and the LCD display will
turn blue and show open.
● Turn the knob clockwise and open the door.
CAUTION: The user preset code “1234”. You may press the key "*" to clear any
incorrect digit you have input. One digit will be cleared each time when you press
the key. If the wrong code is entered 3 times consecutively, an alarm will sound for
10 seconds and the safe will be locked out for 3 minutes.
INSERTING THE BATTERIES
● Open the door.
● Insert 4AA batteries into the battery compartment.
● Under normal condition, if both of the red and the green lights are on at the same
time, it means the voltage is low and you should insert new batteries.
CAUTION:Replace 4 fresh batteries by lining them up in a manner as indicated
by the “+“ and “ - ” signs. When outage for thirty minutes or longer, you should reset
the user code.
● Remove emergency lock cover, then insert the emergency key, and turn it count
clockwise.
●Turn the knob (master key) clockwise to open the door.
OPENING YOUR SAFE FOR THE FIRST TIME
Upon first opening, users should open the safe with the emergency key. The
operation in details refers to “opening the safe with the emergency key”.
CAUTION:Finish operation, pull out the emergency key and keep it in a safe place.
SMS-00-EGD