Instructions / Assembly

2"
FIGURE 1
Lay chair back and chair seat
on their side as shown.
FIGURE 2
Align predrilled holes.
FIGURE 3
Place arm assembly aligning
predrilled holes (as shown).
Insert bolts.
FIGURE 3-1
Add washer and 5/16" nuts to
back side of seat back and
seat. Tighten thoroughly.
FIGURE 4
Repeat same process on the
other side.
FIGURE 5
Attach base with 2" bolts by
inserting bolts from outside of
chair arms. (See Fig. 5-1 for
assembly detail.)
TOOLS NEEDED
• 1/2" open end wrench
• 3/16" Allen wrench
PARTS LIST
1 – chair back
1 – chair seat
2 – arm rests
and assemblies
1 – swivel base
assembly
2 – 4" bolts
4 – 3" bolts
4 – 2" bolts
10 – 5/16" nuts
10 – washers
4" BOLTS
NUTS
WASHERS
2" BOLTS
3" BOLTS
3"
3"
4"
3"
3"
4"
FIGURE 5-1
IMPORTANT: Put washer between
glide arm and pre-attached metal
glide base bracket. Tighten
thoroughly.
2"
WASHER
NUT
METAL
BRACKET
GLIDE
ARM
WASHER
NUT
Assembly Instructions
Fan Back Balcony Glider Chair
Assembly Instructions
Balcony Glider Base
STEP 1
Set top cross piece in slot
on top of legs (as shown).
Align predrilled holes.
Insert 4 – 2 3/4" bolts.
FIGURE 1-A
Add washer and lock nuts to
back side. Tighten thoroughly.
TOOLS NEEDED
• 1/2" open end wrench
• 3/16" Allen wrench
PARTS LIST
2 – legs
1 – top piece
1 – bottom base and
foot plate
4 – gliders
8 – 2 3/4" bolts
4 – 2" bolts
12 – lock nuts
12 – washers
GLIDERS
NUTS
WASHERS
2" BOLTS
2 3/4" BOLTS
WASHER
LOCK NUT
STEP 2
Mount bottom brace and foot
plate using 4 – 2 3/4" bolts,
washers and lock nuts.
STEP 3
Mount 4 gliders to base frame
using 4 – 2" bolts, washers and
lock nuts. (See Figure 3-A for
assembly detail.)
STEP 4
Set fully assembled chair into
base frame and mount as shown
in chair assembly instructions.
2 3/4"
2 3/4"
2 3/4"
2 3/4"
2"
2"
2"
2"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
WASHER
NUT
METAL
GLIDER
BASE
FRAME
IMPORTANT:
Put washer
between base
and metal
glider bracket.
Tighten lock nut
thoroughly.
FIGURE 3-A
FAN BACK BALCONY GLIDER CHAIR