Operator`s manual

SECTION 9. OPERATION

Form 169006 121 Revision D

9.18.4 Converting from Field to Transport

Position

Raise header fully, and proceed as follows:

DANGER

To avoid bodily injury or death from

unexpected start-up or fall of raised header,

stop engine, remove key, and engage header

lift cylinder stops before going under header

for any reason.

9.18.4.1 Left Wheels To Transport Position

CAUTION

Stand clear of wheels and release linkage

carefully as wheels will drop once the

mechanism is released.

a. Remove clevis pin (A).

b. Pull latch handle (B), and disengage link (C) from

lug (D) to lower wheels.

c. Place suspension assembly in “full upward

position” (E) in leg, and lower handle (F) to lock.

d. Remove pin (G) from storage at top of leg, move

and swivel wheels clockwise so that lug (D) faces

forward.

e. Insert pin (G), and turn pin to lock.

f. Locate tow-bar (H) onto axle, and push against

latch (J) until tow-bar pins drop into hooks (K).

g. Check that latch (J) has engaged tow-bar.

h. Install clevis pin (A), and secure with hairpin.

i. Connect plug (L) for lights.

FIELD TO TRANSPORT - LH SIDE

Lock

FIELD TO TRANSPORT - LH SIDE