Operator`s manual

SECTION 9. OPERATION

Form 169006 122 Revision D

9.18.4.2 Right Side Wheels To Transport

Position

a. At wheels at the right end of header, remove

hairpin (A) from latch.

b. Lift latch (B), disengage right axle, and lower to

ground.

CAUTION

Stand clear of wheels and release linkage

carefully as wheels will drop once the

mechanism is released.

c. Carefully pull handle (C) to release the spring,

and let the wheel drop to the ground.

d. Lift wheel and linkage with handle (D), and

position linkage in second slot from bottom.

e. Lower handle (C) to lock.

f. Remove pin (E), and install at (F) to secure

linkage. Turn pin (E) to lock.

g. To position the left wheel (G), pull pin (H), swivel

wheel counter clockwise, and re-lock with pin (H).

h. Left wheel is now in transport position as shown

above.

i. Pull pin (J), swivel wheel clockwise as shown,

and lock with pin (J).

j. Swivel the right axle (K) to front of header.

(continued next page)

FIELD TO TRANSPORT - RH SIDE

Release

LOCK

FIELD TO TRANSPORT - RH WHEEL

FIELD TO TRANSPORT - RH SIDE

FIELD TO TRANSPORT - LH WHEEL