Operator`s manual

SECTION 9. OPERATION
Form 169006 123 Revision D
k. Remove pin (L), raise support (M) to position
shown, and re-insert pin (L).
IMPORTANT
Ensure pin (L) engages the tube on the
axle.
l. Swing brace (N) into position as shown, and
insert brace into slot (O) behind cutterbar.
Position brace so that pin (P) engages hole in
bracket (Q).
m. Right hand wheel is now in transport position.
TRANSPORT POSITION - RH WHEEL
M
L
O
P
Q
N