Operator`s manual

SECTION 10. MAINTENANCE AND SERVICING

Form 169006 183 Revision D

f. Remove nuts, screws (G), and straps (H) along

draper joint.

g. Pull draper from deck.

h. Install new draper over drive roller (J) with

chevron cleat (K) pointing to front of adapter, and

ensuring draper guides fit in drive roller grooves

(L).

i. Pull draper along bottom of adapter deck and

over draper supports (M).

j. Connect draper with straps (H), screws (G) and

nuts with screw heads facing rear of deck.

Tighten nuts so that end of screw is

approximately flush with nut.

k. Adjust draper tension. Refer to Section 10.12.1

Draper Tension Adjustment.

REAR OF DECK