Operator`s manual

SECTION 10. MAINTENANCE AND SERVICING

Form 169006 185 Revision D

10.13.2.2 Draper Installation

a. Insert draper into deck at outboard end, under the

rollers. Pull draper into deck while feeding it at

the end.

b. Feed in the draper until it can be wrapped around

the drive roller.

c. Similarly insert the other end into the deck over

the rollers. Pull draper fully into the deck.

d. Attach ends of draper with tube connectors (D).

e. Install screws (C) with heads facing the center

opening.

f. Adjust tension. Refer to Section 10.13.1 Header

Draper Tension Adjustment.