Operator`s manual

SECTION 10. MAINTENANCE AND SERVICING

Form 169006 204 Revision D

10.14.11 Reel Drive Motor: D50

DANGER

To avoid bodily injury from fall of raised reel,

always engage reel props before going under

raised reel for any reason.

10.14.11.1 Removal: Drive Motor

a. Lower header, raise reel, and engage reel props.

b. Remove reel drive cover. Refer to Section

10.14.6 Reel Drive Chain: D50.

c. Loosen chain (A), and remove drive sprocket (B).

Refer to Section 10.14.8 Reel Drive Sprocket:

D50.

d. Disconnect hydraulic lines (C) at motor fittings.

Cap or plug open ports and lines.

e. Remove the four nuts and bolts (D), and remove

motor.

10.14.11.2 Installation: Drive Motor

Refer to illustrations opposite.

a. Position hydraulic motor on motor mount, and

install four countersunk bolts (D). Torque to

75 ft·lbf (102 N·m).

b. Re-attach hydraulic lines (C) to motor.

c. Install sprocket (B) and chain (A). Refer to

Section 10.14.8 Reel Drive Sprocket: D50.

d. Re-attach reel drive cover. Refer to Section

10.14.6 Reel Drive Chain: D50.