Operator`s manual

SECTION 12. OPTIONS AND ATTACHMENTS
Form 169006 237 Revision D
12.14 ROCK RETARDER KIT
Available as an attachment for use with D50 and
D60 Harvest Header, and FD70 FlexDraper
headers.
The rock retarder kit keeps rocks from rolling past
the cutterbar and onto the drapers.
Installation and adjustment instructions are
included with the kit.
12.15 RICE DIVIDER KIT
Available as an attachment for use with D50 and
D60 Harvest Header, and FD70 FlexDraper
headers.
The rice dividers attach to the LH and RH
endsheets, and perform the same function in tall
and tangled rice crops as standard equipment
crop dividers.
Installation and adjustment instructions are
included with the kit.
12.16 HYDRAULIC REEL FORE-AFT
POSITIONER
Available for headers that were not factory
equipped with the hydraulic reel fore-aft option.
The hydraulic fore-aft option allows an Operator
to control the reel fore-aft position from the cab.
Installation and adjustment instructions are
included with the kit.
12.17 CA20 DELICATE SEED SAVER
KIT
It is a kit that encloses the transition area of the
feed draper and side draper area near the front of
the header and also includes side rubber flaps to
close off areas in between the adapter and
header.
This kit is NOT RECOMMENDED for use if there
are rocks present.
12.18 KNIFE HEAD SHIELD
Available as an attachment for use with D50 and
D60 Harvest Header, and FD70 FlexDraper
headers.
The shields attach to the endsheets, and reduce
the knife head opening to prevent cut crop from
accumulating over the knife head. They are
slightly different depending on header size:
 Use MacDon part # 125853 for 25 FT and
smaller.
 Use MacDon part #125538 for 30 FT and
larger.