Operator`s manual

SECTION 6. SPECIFICATIONS
Form 169006 25 Revision D
6 SPECIFICATIONS
HEADER MODEL
D60 D50 / D60 D50 / D60 / FD70 D60 / FD70 D60 / FD70
HEADER SIZE 20 FT 25 FT 30 FT 35 FT 40 FT 45 FT
OVERALL
Width
(Inches (mm))
Transport (Reel Full
Aft) With CA20 Adapter
96 (2438)
Field
255.1 (6479) 315.1 (8003) 375.1 (9527) 435.1 (11051) 495.1 (12575) 555.1 (14099)
Length
(Inches (mm))
Transport
(with Tow
Pole)
D50, D60
Not Applicable 505.7 (12845) 547.5 (13907)
601.5 (15278) 631.5 (16040)
FD70
Not Applicable 513.0 (13029) 556.7 (14141)
Height -Transport
97 in. (2464 mm)
Estimated Weight Range
Base Header - No Adapter
(lb (kg))
D50
Not Applicable 3500 (1589) 4150 (1884) 4700 (2134) Not Applicable
D60
3400 (1544)
3500 - 4100
(1589 - 1861)
4200 - 5100
(1907 - 2315)
4700 - 5700
(2134 - 2588)
5400 - 5800
(2451 - 2633)
6200 (2815)
FD70
Not Applicable 4850 (2202) 5250 (2384)
5700 - 5900
(2588 - 2979)
6300 (2860)
CUTTERBAR
Width (Inches (mm)
240 (6096) 300 (7620) 360 (9144) 420 (10668) 480 (12192) 540 (13716)
Header Cutting Height
Shortest Center-Link
1.3 in. (32 mm) below ground -
52.3 in. (1328 mm) above
0.8 in. (20 mm) below ground - 52.8 in. (1340 mm) above
Longest Center-Link
4.6 in. (117 mm) below ground
- 46.9 in. (1192 mm) above
4.1 in. (105 mm) below ground - 47.4 in. (1204 mm) above
Guard Angle (Cutterbar on Ground)
7.0° - 12.4° 2.0° - 7.4°
SICKLE
Drive Type
SK
Hydraulic Motor / ‘C’ Belt/Heavy Duty (MD) Wobble Box
DK (Except D50)
Hydraulic Motor / Two ‘B’ Timing Belts / Two Heavy Duty (MD)
Wobble Boxes
Two Hydraulic Motors To "C"
Belts, Untimed To Heavy Duty
(MD) Wobble Boxes.
Sickle Speed
SK
1200 Strokes Per Minute Not Applicable
DK
1380 Strokes Per Minute
Stroke
3 in. (76 mm)
Sections - Over-Serrated
& Bolted (serrations/inch)
Cut-Out or Solid
14 9 / 14 9
Guards and
Hold-Downs
Pointed
D50
Not Applicable Pointed / Case Hardened / Sheet Metal / Adjuster Bolt Not Applicable
D60
Case Hardened or Double Heat Treated / Sheet Metal / Adjuster Bolt
FD70
Not Applicable Double Heat Treated / Sheet Metal / Adjuster Bolt
Stub (Except D50)
Sheet Metal
HD
Sheet Metal or
Forged HD
Not Applicable
CONVEYOR AND DECKS
Draper Drive
Hydraulic
Draper Width
41.6 in. (1057 mm)
Draper Speed
247 - 464 ft/min (75 - 141 m/min)
Delivery Opening
Width
D50
Not Applicable 73.6 in. (1870 mm) Not Applicable
D60
73.6 in. (1870 mm)
FD70
Not Applicable 73.6 in. (1870 mm)
Height
37.2 - 41.7 in. (945 - 1058 mm)
Draper Angle
(Cutterbar on Ground)
D50, D60
13.0° - 18.4°
FD70
Not Applicable 14.0° - 19.4°