Operator`s manual

Form 169006 1 Revision D
1 INTRODUCTION
This instructional manual contains information on the D50/D60 Harvest Headers, FD70 FlexDraper, and the CA20
Combine Adapter. It must be used in conjunction with your Combine Operator's Manual.
The FD70 FlexDraper header is specially designed as a “straight cut” header, and is equipped to work well in all
straight cut conditions, whether cutting on or above the ground, utilizing a three piece flexible frame to closely follow
ground contours.
The CA20 Combine Adapter allows any of the D and FD Series headers to be easily attached to your specific
combine.
CAREFULLY READ ALL THE MATERIAL PROVIDED BEFORE ATTEMPTING TO UNLOAD, ASSEMBLE, OR
USE THE MACHINE.
Use this manual as your first source of information about the machine. If you follow the instructions given here, your
Header will work well for many years. If you require more detailed service information, a Service Manual is available
from your MacDon Dealer.
Use the Table of Contents and the Index to guide you to specific areas. Study the Table of Contents to familiarize
yourself with how the material is organized.
Keep this manual handy for frequent reference and to pass
on to new Operators or Owners.
A storage case for this manual is located inside the header
left endshield.
Call your MacDon Dealer if you need assistance,
information, or additional copies of this manual.
Published August, 2011