Operator`s manual

SECTION 7.2 CASE IH 7010, 8010, 7120, 8120, 88 SERIES

Form 169006 33 Revision D

d. Remove electrical connector (E), and replace

cover.

e. Push in lock button (F), and pull handle (G) to

release coupler (H). Position coupler (H) onto

storage plate (J) on combine.

f. Place electrical connector (E) in storage cup on

plate (J)

h. Push handle (G) to “closed position” until lock

button (F) snaps out.

Close cover (K).

i. Lift lever (L), pull and lower handle (M) to

disengage feeder house/adapter lock (N).

j. Lower feeder house until it disengages adapter

support.

k. Slowly back combine away from adapter.