Operator`s manual

Form 169006 2 Revision D
2 MODEL AND SERIAL NUMBER
NOTE: Right hand (RH) and Left-hand (LH) designations are determined from the Operator’s position, facing
forward.
Record the Model Number, Serial Number, and Model Year of the Header, Slow Speed Transport/Stabilizer Wheel
Option (if installed), and the Combine Adapter on the lines below:
HEADER MODEL______________SERIAL NO._________________YEAR_____
Serial Number Plate is located on the left hand endsheet, near the knife
drive motor.
ADAPTER MODEL________SERIAL NO.______________YEAR_____
Serial Number Plate is located on the frame above the main
drive gearbox.
SLOW SPEED TRANSPORT/STABILIZER WHEEL OPTION
SERIAL NO.__________________YEAR_____
Serial Number Plate is located on the left hand wheel pivot tube.