Operator`s manual

SECTION 7.5 JOHN DEERE 50 SERIES
Form 169006 45 Revision D
k. Open shield (H) on combine.
l. Rotate disc (J) on adapter driveline storage hook,
and remove driveline from hook.
m. Pull back collar (K) on end of driveline, and push
onto combine output shaft (L) until collar locks.
n. Close driveshield (H) on combine.
o. If adapter is equipped with reel fore-aft/header tilt
selector, connect harness (M) to combine.
NOTE
Connector (M) may need to be retrieved
from hydraulics compartment access
hole (N).
p. Disengage both adapter float locks by moving
latch (O) away from adapter, and moving lever
(P) at each lock to “lowest position”.
J
K
L
N
M
P
LOCK
UNLOCK
O
H