Operator`s manual

SECTION 7.7 NEW HOLLAND CR, CX

Form 169006 54 Revision D

7.7 NEW HOLLAND CR, CX

7.7.1 Attachment

a. Ensure handle (A) is positioned so that hooks (B)

can engage adapter.

b. Slowly drive combine up to adapter until feeder

house saddle (C) is directly under the adapter top

cross member (D).

c. Raise feeder house to lift adapter, ensuring

feeder saddle is properly engaged in adapter

frame.

CAUTION

Stop engine, and remove key from ignition

before leaving Operator's seat for any reason.

A child or even a pet could engage an idling

machine.

d. Lift lever (E) on adapter at left side of feeder

house, and push handle (A) on combine so that

hooks (B) engage pins (F) on both sides of the

feeder house.

e. Push down on lever (E) so that slot in lever

engages handle to lock handle in place.

f. If hook (B) does not fully engage pin on adapter

when (A) and (E) are engaged, loosen bolts (G)

and adjust lock as required. Re-tighten bolts.

(continued next page)