Operator`s manual

SECTION 7.8 AGCO
Form 169006 58 Revision D
7.8 AGCO
Gleaner R Series, A Series, Challenger 660, 670,
680B, Massey 9690, 9790, 9895
7.8.1 Attachment
IMPORTANT
Some combine models require special
center-link components to ensure
clearance to the combine cab.
To avoid damage to your combine, lift
feeder slowly, and check clearance
between cab and header center-link. If
clearance is inadequate, contact your
MacDon Dealer to order special center-
link components. Refer to Section 7.1.1
Center-Link Kit.
a. Retract lugs (A) at base of feeder-house with lock
handle (B) (see picture opposite column).
b. Slowly drive combine up to adapter until feeder
house is directly under the adapter top cross
member (C), and alignment pins (D) are aligned
with holes (E) in adapter frame.
(continued next page)
ALL EXCEPT GLEANER ‘R’ SERIES
B
GLEANER ‘R’ SERIES
B
A
E
C
D
ALL EXCEPT GLEANER ‘R’ SERIES
and ‘LL’ MODEL
‘LL’ MODEL
D
GLEANER ‘R’ SERIES
D