Operator`s manual

SECTION 7.8 AGCO
Form 169006 59 Revision D
c. Raise feeder house to lift adapter, ensuring
feeder house saddle (F) and alignment pins are
properly engaged in adapter frame.
d. Raise header slightly off the ground.
CAUTION
Stop engine, and remove key from ignition
before leaving Operator's seat for any reason.
A child or even a pet could engage an idling
machine.
e. Engage lugs (A) with adapter using lock handle
(B).
f. Connect adapter hydraulic quick coupler to
combine receptacle as follows:
1. Pull handle (G) to release coupler (H) from
adapter.
2. Push handle (J) on combine to “full open
position”.
3. Clean mating surfaces of coupler and
receptacle if necessary.
4. Position coupler (H) onto combine receptacle
(K), and pull handle (J) to fully engage
coupler into receptacle.
g. Rotate disc (L) on adapter driveline storage hook,
and remove driveline from hook.
(continued next page)
H
G
F
L
ALL EXCEPT GLEANER ‘R’ SERIES
B
GLEANER ‘R’ SERIES
B
A
K
J