Operator`s manual

SECTION 8.2 FD70 FLEXDRAPER AND ADAPTER
Form 169006 74 Revision D
s. Disconnect reel hydraulics as follows:
1. Push in lock button (Q), and pull handle (R)
to release coupler (S).
2. Push handle down until button (Q) snaps out.
3. Store hoses over adapter frame.
t. Ensure header is on ground, or is supported by
wheels in Transport mode.
u. Start engine, and slowly back combine away from
header.
v. Stop engine, and remove key.
w. Re-install bolts (T), washers, and spacers
removed in step k. into adapter legs.
R
Q
S
T