Operator`s manual

SECTION 9. OPERATION
Form 169006 79 Revision D
9 OPERATION
9.1 OWNER/OPERATOR
RESPONSIBILITIES
CAUTION
 It is your responsibility to read and
understand this manual completely before
operating the header. Contact your
MacDon Dealer if an instruction is not
clear to you.
 Follow all safety messages in the manual
and on safety decals on the machine.
 Remember that YOU are the key to safety.
Good safety practices protect you and the
people around you.
 Before allowing anyone to operate the
header, for however short a time or
distance, make sure they have been
instructed in its safe and proper use.
 Review the manual and all safety related
items with all Operators annually.
 Be alert for other Operators not using
recommended procedures or not
following safety precautions. Correct
these mistakes immediately, before an
accident occurs.
 Do not
modify the machine. Unauthorized
modifications may impair the function
and/or safety and affect machine life.
 The safety information given in this
manual does not replace safety codes,
insurance needs, or laws governing your
area. Be sure your machine meets the
standards set by these regulations.
9.2 OPERATIONAL SAFETY
Follow these safety precautions:
CAUTION
 Follow all safety and operational
instructions given in your Operator's
Manuals. If you do not have a combine
manual, get one from your MacDon Dealer
and read it thoroughly.
 Never attempt to start the engine or
operate the machine except from the
combine seat.
 Check the operation of all controls in a
safe clear area before starting work.
 Do not
allow riders on combine.
 Never start or move the machine until you
are sure all bystanders have cleared the
area.
 Avoid travelling over loose fill, rocks,
ditches or holes.
 Drive slowly through gates and doorways.
 When working on inclines, travel uphill or
downhill when possible. Be sure to keep
transmission in gear when travelling
downhill.
(continued next page)