Instruction Guide
Page 2 of 2 11775 E. 45th Ave. Denver, CO 80239 Ph: 1-800-880-1180 Fax: 303-695-7633©2019 American Lighting, Inc. REV1844 www.AmericanLighting.com
INTERCONNECTING FIXTURES (SEE FIGURES 4 & 5):
Interconnecting via linking/jumper cable: To interconnect nearby fixtures, EDGE-EX linking cable (sold separately) as shown in Figure 4.
Each fixture, power connection cord, and accessory linking cable (sold separately) has dedicated, mating INPUT and OUTPUT ends and are
marked with an arrow to ensure correct orientation during installation (arrows should align when connected, See Figure 5).
Interconnecting via end-to-end linking connector: To interconnect fixtures directly to each other (end-to-end), utilize the in-line connector
(included with each fixture) by inserting fully into appropriate INPUT/OUTPUT side of the EdgeLink flat panel.
MOUNTING FIXTURES (SEE FIGURE 6):
Each fixture has attached magnets on the underside and includes a metal mounting plate with mounting screws.
1. Determine the location(s) of fixture(s) to be installed. Ax metal mounting plate to mechanically sound surface via included mounting screws.
2. Attach fixture to metal mounting plate by bringing underside of fixture up to axed metal mounting plate. The magnets will adhere to the
metal mounting plate and stay in place.
24V EDGELINK FLAT PANEL (SINGLE CCT)
INSTALLATION INSTRUCTIONS
EDGE-WW Series
5- YEAR LIMITED PRODUCT WARRANTY
This product is warranted to be free from defects in material and workmanship for a period of five years from the date of purchase. Products that prove to be defective during
this period will be either repaired (i.e. replacement of defective electronics, defective parts of the fixture housing, lens, wiring, switching or lamp sockets; excluding the lamp)
or replaced, at the discretion of American Lighting, Inc. Claims for defective products must be submitted to the retail location from which the product was purchased within
the warranty period. Upon submission of proper return claim documentation and product to American Lighting, Inc by the retailer, American Lighting, Inc reserves the right to
inspect the product for misuse or abuse. Claims for indirect or consequential damages or for product that, in American Lighting Inc’s opinion has been misused will be denied.
This is a warranty of product reliability only and not a warranty of merchantability or fitness for a particular purpose. American Lighting, Inc shall have no liability whatsoever in
any event for payment of incidental or consequential damages, including, without limitations, installation costs and damages for personal injury and property. These products
may represent a possible shock or fire hazard if improperly installed or altered in any way. This warranty applies only to product that has been properly installed in accordance
with instruction sheet and current local codes and/or the National Electrical Code. Warranty does not apply to any product that has been improperly installed or in situations
where components have been altered in any way.
For questions, comments, technical assistance and/or repair parts, please call toll free at:
1-800-285-8051 (M-F 8am – 5pm, MST)
FIGURE 4 FIGURE 5
FIGURE 6
Aligned Arrows