Specification Sheet

www.AmericanLighting.com Sales@AmericanLighting.com | Denver, CO | 800.880.1180 ©2021 American Lighting Inc. REV2107
TRULUX / SPTL SERIES
SPTL SERIES TAPE LIGHT
24V DC Spec Grade Single Color
PROJECT:
TYPE:
LOCATION:
CATALOG NUMBER:
At full brightness, Spec Grade tape light oers up to 525 lumens
per foot making for a perfect solution when lighting installs require
bright and impactful impressions. The superior light output is best
used in large open spaces in both residential and commercial
applications and is available in multiple color temps with maximum
runs lengths up to 13.1 feet.
SPTL SERIES QUICK LOOK
13.1 ft Max Run
IP54 & IP65 Options 10mm (0.39”) WideCuttable every 1.97”2835 96+ CRI LEDs 0.31” LED Spacing
Specification grade output performance
Available in 2400K, 2700K, 3000K, and 4000K
Up to 96+ color rendering index
Lumen output ranging from 280Lm to 525Lm per foot
Cuttable every 1.97” with 13.1ft max run
Easy installation featuring 3M VHB adhesive backing
Available in IP54 & IP65 rating options
Dimmable (5-100%) with most ELV, TRIAC dimmers
cULus Listed for indoor dry/damp, and wet locations
50,000 hours rated life
SPTL SERIES IP RATINGS
IP54 Coated
Features a light nano-coating applied to the tape
light and LED’s that protects from moisture and dust.
Best suited: Indoor dry & damp locations
IP65 Jacketed
Features a clear protective silicone jacketing that
protects the tape light from sprayed water and dust.
Best suited: Indoor & Outdoor damp & wet locations
SPTL SERIES QUICK SPECS
VOLTAGE 24V DC
WATTAGE 7.8W / ft
LUMENS Up to 525Lm / ft
CCT OPTIONS 2400K / 2700K / 3000K / 4000K
CRI Up to 96+
MAX RUN 13.1ft
CUTTING POINTS 1.97” (50mm)
IP RATING IP54 - Coated / IP65 - Jacketed
DIMMING TRIAC / ELV (5 - 100%)
DIMENSIONS 0.39” 10mm W x 0.06” 1.65mm H
BEAM ANGLE 120°
OPERATING TEMP 5°C (41°F) to 70°C (158°F)
CERTIFICATIONS cULus Listed - Dry / Damp Location
RATED LIFE 50,000 Hours
Recommended: In commercial applications, solder all connection points.
ALWAYS mount via an aluminum extrusion to allow proper dissipation of heat.

Summary of content (2 pages)