User`s manual

Chapter 3 Award BIOS Setup 41
3.6 Integrated peripherals
Figure 3-5: Integrated peripherals
Onboard FDC Controller
This option enables the floppy drive controller on the CPC-2245.
The settings are Enabled, or Disabled.
Onboard Serial Port 1/2
This option enables serial port 1/2 on the board and specifies the
base I/O port address for serial port 1~2.
The settings are Disabled, 3F8h/IRQ4, 3E8h/IRQ4, 2E8h/IRQ3,
and 2F8h/IRQ3.