Technical information

PROGRAMMING
30
b. Enter the password (see page 25), then press .
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
c. Press
. The LED for "SOFT" will be steady "ON".
d. To change the temperature, press or then
press
.
28 Blinks
e. To change the temperature, press or then
press
.
35 Blinks
f. To change the temperature, press or then
press
.
40 Blinks
g. To change the temperature, press or then
press
.
35 Blinks
h. To change the temperature, press or then
press
.
42 Blinks
The display will show:
D.5.1.2. Hard Cycle – Automatic Mode
a. With the display reading "OFF", press
.
b. Enter the password (see page 25), then press
.
After about 2 seconds the display will automatically change
to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
OFF
PARAM. PROGRAMMING
ENTER PASSWORD
***
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
HOLDING HIGH TEMP.
42 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
HOLDING LOW TEMP.
35 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
FOOD TEMPERATURE
40 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
HIGH AIR TEMPERATURE
35 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
LOW AIR TEMPERATURE
28 °F
PARAM. PROGRAMMING
ENTER PASSWORD
***