Technical information

PROGRAMMING
35
D.5.4. Defrost Cycle Programming
With the display reading "OFF", press
.
Enter the password (see page 25), then press .
After about 2 seconds the display will change to:
a. Press the
button. The LED for "DEFROST" will
be "ON".
b. Press or to choose “ELECTRIC”, then
press
.
ELECTRIC
Blinks
c. To change the time, press or then press
.
15 Blinks
d. To change to YES or NO, press or then
press
.
NO Blinks
If you chose YES at the previous step, follow the next steps to setup the automatic defrost cycle. If you
chose NO then you have completed setting up the defrost cycle.
e. To change the minimum time that the unit must operate
before enabling automatic defrost cycle, press
or
then press .
6 Blinks
f. To change the time, press or then press
.
40 Blinks
The display will show:
PARAM. PROGRAMMING
ENTER PASSWORD
***
OFF
PARAM. PROGRAMMING
DEFROST CYCLE
CHOOSE TYPE
ELECTRIC
PARAM. PROGRAMMING
DEFROST CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
DEFROST CYCLE
AUTO DEFROST TIME
30 MIN
PARAM. PROGRAMMING
DEFROST CYCLE
UNIT OPERATING TIME
8 HOURS
PARAM. PROGRAMMING
DEFROST CYCLE
AUTOMATIC DEFROST
NO
PARAM. PROGRAMMING
DEFROST CYCLE
MANUAL DEFROST TIME
30 MIN
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE