Technical information

PROGRAMMING

E. Operation

E.1. Automatic Mode – Soft Chill

a. With the display reading "OFF", press the

(“ON/OFF”) button.

b. To select the soft cycle, press the appropriate button

. The LED for "SOFT" will be steady "ON".

c. The LED's for “AUTOMATIC” and “MANUAL” are now

blinking. To select an “AUTOMATIC” cycle, press the

button

. The LED for “AUTOMATIC” will now be

steady "ON".

d. To choose your recipe, press or then press

1 Blinks

e. To choose your recipe, press or then press

2 Blinks

f. To choose your recipe, press or then press

1 Blinks

g. To choose your recipe, press or then press

2 Blinks

NOTE:

This screen is shown only if the RECIPE parameter is set to “ON” in the Initial Programming.

A 4 food probe configuration is shown.

The red food probe only will be active in the standard configuration.

To enter additional recipe names, refer to Page 36 "Recipe Name Programming".

GREEN FOOD PROBE

ENTER RECIPE NUMBER

ROAST BEEF

BLUE FOOD PROBE

ENTER RECIPE NUMBER

CHICKEN

YELLOW FOOD PROBE

ENTER RECIPE NUMBER

ROAST BEEF

RED FOOD PROBE

ENTER RECIPE NUMBER

CHICKEN

SOFT CYCLE

CHOOSE MODE

AUTO / MAN

OPERATING MODE

CHOOSE

OPERATING CYCLE

OFF