Technical information

PROGRAMMING
42
The display will show:
alternating with
alternating with
x. Press the
("START/STOP") button to start the
cycle.
PRESS
START
Blinks
The display will show briefly:
Then the display will show:
alternating with
01:29
Will count
down
The MANUAL mode uses time and the air probe temperature to control the cycle.
The default total time for a soft cycle is 90 minutes. After the 90 minutes the unit will automatically go into
holding mode.
The display will show:
alternating with
00:00
Blinks
The operator can now end this cycle by pressing ("START/ STOP").
The display will show briefly:
Then the display will show:
STARTING CYCLE . . .
R / CHICKEN 140°F
Y / ROAST BEEF 143°F
B / CHICKEN 141°F
G / ROAST BEEF 142°F
03.07.2006 10:28 AM
AIR 1 75°F
00:00
READY TO START
PRESS START
STOPPING CYCLE . . .
R / CHICKEN 40°F
Y / ROAST BEEF 40°F
B / CHICKEN 40°F
G / ROAST BEEF 40°F
03.07.2006 10:41 AM
AIR 1 34°F
00:00
OPERATING MODE
CHOOSE
OPERATING CYCLE
R / CHICKEN 140°F
Y / ROAST BEEF 143°F
B / CHICKEN 141°F
G / ROAST BEEF 142°F
03.07.2006 10:41 AM
AIR 1 75°F
01:29