Technical information

PROGRAMMING
44
The display will show:
alternating with
alternating with
ff. Press the
("START/STOP") button to start the
cycle.
PRESS
START
Blinks
The display will show briefly:
Then the display will show:
alternating with
00:59
Will count
down
The MANUAL mode uses time and the air probe temperature to control the cycle.
After the time for the cycle expires, the unit will automatically go into holding mode.
The display will show:
alternating with
00:00
Blinks
The operator can now end this cycle by pressing the ("START/ STOP") button.
The display will show briefly:
Then the display will show:
STOPPING CYCLE . . .
STARTING CYCLE . . .
R / CHICKEN 40°F
Y / ROAST BEEF 40°F
B / CHICKEN 40°F
G / ROAST BEEF 40°F
03.07.2006 11:57 AM
AIR 1 34°F
00:00
OPERATING MODE
CHOOSE
OPERATING CYCLE
R / CHICKEN 140°F
Y / ROAST BEEF 143°F
B / CHICKEN 141°F
G / ROAST BEEF 142°F
03.07.2006 10:28 AM
AIR 1 75°F
00:59
R / CHICKEN 140°F
Y / ROAST BEEF 143°F
B / CHICKEN 141°F
G / ROAST BEEF 142°F
03.07.2006 10:28 AM
AIR 1 75°F
00:00
READY TO START
PRESS START