Technical information

PROGRAMMING
45
E.5. UV (STERILIZATION) CYCLE
a. To perform a UV cycle remove all food, then press the
(“UV LIGHT”) button.
b. Press the ("START/STOP") button to start the UV
cycle.
READY TO
START
Blinks
The display will show briefly:
Then the display will now show:
29:59
Will count
down to
00:00
After 30 minutes the display will show:
The controller will beep for a few seconds.
COMPLETE
Blinks
The operator can now end this cycle by pressing ("START/ STOP").
The display will show briefly:
Then the display will show:
STOPPING CYCLE . . .
OPERATING MODE
CHOOSE
OPERATING CYCLE
STARTING CYCLE . . .
03.07.2006 12:13 PM
UV CYCLE
COMPLETE
03.07.2006 11:43 AM
UV CYCLE
UV TIME 29:59
OPERATING MODE
CHOOSE
OPERATING CYCLE
03.07.2006 11:43 AM
UV CYCLE
READY TO START