Technical information

PROGRAMMING
46
E.6. DEFROST CYCLE
The defrost cycle runs the defrost heaters for 30 minutes.
a. To perform a defrost cycle, press
("DEFROST")
button.
b. Press the ("START/STOP") button to start the
defrost cycle.
READY TO
START
Blinks
The display will show briefly:
The display will now show:
29:59
Will count
down to
00:00
After 30 minutes the display will show:
The controller will beep for a few seconds.
The operator can now end this cycle by pressing ("START/ STOP").
The display will show briefly:
Then the display will now show:
In addition to the manual defrost the are equipped with an automatic defrost feature. The automatic defrost
cycle will start when the unit is in “OFF” mode, after continuous operation for a preset amount of time (see
Page 35).
To stop the automatic defrost cycle press the
(“ON/OFF”) button.
STOPPING CYCLE . . .
OPERATING MODE
CHOOSE
OPERATING CYCLE
STARTING CYCLE . . .
03.07.2006 12: 45PM
DEFROST CYCLE
COMPLETE
03.07.2006 12:15 PM
DEFROST CYCLE
DEFROST TIME 29:59
OPERATING MODE
CHOOSE
OPERATING CYCLE
03.07.2006 12:15 PM
DEFROST CYCLE
READY TO START