Technical information

PROGRAMMING
48
E.7.3. Manual Thaw Cycle
a. With the display reading "OFF", press the
(“ON/OFF”) button.
b. To perform a thaw cycle, press ("DOWN") button.
c. The display will show.
d. Press the ("MANUAL") button.
The display will now show:
To change the thaw cycle time press
or then
press the
("START/STOP") button to start the cycle.
06:00
Blinks
Note: If or button is held pressed, the time will change in 30 min. increments.
The display will show:
05:59
Will count
down
The MANUAL mode uses only the air probe temperatures to control the cycle.
When the thaw cycle time elapses the unit will automatically go into holding mode.
The display will show:
alternating with
HOLDING
Blinks
OFF
03.07.2006 10:28 AM
AIR 40
O
F
T/ 38
O
F
THAW CYCLE 02:29
THAW CYCLE
HOLDING
03.07.2006 10:28 AM
AIR 45
O
F
T/ 0
O
F
MANUAL THAW 05:59
MANUAL THAW
MANUAL THAW TIME
H 06:00 MIN
THAW CYCLE
AUTO / MANUAL
OPERATING MODE
CHOOSE CYCLE