Full Product Manual

American Spa Owner’s Manual

LTR50001143, Rev. ZZ

Preparing for Your New Portable Spa

6. Install the lter into the lter canister.

Make sure the lter has soaked at least 30 minutes

before you install it. Insert the lter all the way and

screw it in. Do not over-torque the cartridge during

installation, just hand tighten gently.

7. Adjust water chemistry.

Test and adjust the water chemistry. See the section on page 25 for instructions on water clarity.

8. Let the spa heat up.

When the spa has nished priming, the heater will activate. Put the cover on and let the spa heat to the

set temperature.