Dimensions Guide

© 2003 American Standard Inc.
BS-67
COMRADE™
WALL-HUNG LAVATORY
VITREOUS CHINA
COMRADE WALL-HUNG LAVATORY
• Vitreous china
• Rear overflow
• Soap depression
• Faucet ledge (faucet not included)
❏ 0124.024 With wall hanger (Illustrated)
Faucet holes on 102mm (4") centers
❏ 0124.131* For concealed arms support
Faucet holes on 102mm (4") centers
Nominal Dimensions:
508 x 464mm
(20" x 18-1/4")
Bowl sizes:
381mm (15") wide,
276mm (10-7/8") front to back,
159mm (6-1/4") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified
❏ Color: ❏ White ❏ Bone ❏ Silver
❏ Fawn Beige
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.
* See faucet section for additional models available
Top of front rim mounted 864mm (34") from finished floor.
MEETS THE AMERICAN DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USEABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Revised 6/95
BARRIER FREE
FINISHED
WALL
102mm
(4)
FINISHED
FLOOR
POP-UP WASTE
OUTLET 1-1/4 O.D.
DRAIN PLUG WASTE
OUTLET 1-1/4 O.D.
203mm
(8)
SUPPLIES
AS REQ'D.
203mm
(8)
508mm
(20)
64mm
(2-1/2)
171mm
(6-3/4)
464mm
(18-1/4)
267mm
(10-1/2)
64mm
(2-1/2)
38mm
(1-1/2)
108mm
(4-1/4)
349mm
(13-3/4)
11mm (7/16) DIA.
ANCHOR SCREW
HOLES
C/L
286mm
(11-1/4)
235mm
(9-1/4)
*
*
76mm
(3)
8mm x 27mm
(5/16 x 1-1/16) SLOTS
S-9 HANGER
*
787mm (31)
864mm (34)
* Rough-in for Concealed Arms shown on reverse.