Installation Sheet

ManualsBrandsAmerican Standard ManualsKitchenCollection 6-1/4 in. Pedestal Sink Basin in Linen

730520-100 Rev. D

Product names listed herein are trademarks of American Standard Inc.

ASSEMBLY & INSTALLATION

INSTRUCTIONS

7483.002

7483.295

CONSOLE TABLE

- 1 -

COLLECTION

“”

THE

Recommended Tools & Materials

Roughing-in Dimensions

Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years.

To help insure that the installation process will proceed smoothly, please read these instructions carefully before you

begin. Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.

Adjustable Wrench

Channel Locks

Regular Screwdriver

Phillips Screwdriver

10'

Pipe Wrench

Putty Knife

Drill

Saber Saw

Level

Basin Wrench

Plumbers' Putty or

Caulking

Tubing Cutter

Tape

Measure

Hacksaw

(813mm)

26-5/8

(676mm)

FINISHED WALL

(432mm)

8-1/2

(216mm)

9-1/2

(241mm)

0283.000 STANDARD® CONSOLE PEDESTAL TOP

8710.000.002 CONSOLE TABLE LEGS (Chrome)

8710.000.095 CONSOLE TABLE LEGS (Satin)

(508mm)

(914mm)

10-1/4

(260mm)

FINISHED

FLOOR

3-7/8

(98mm)

3/4

(19mm)

(330mm)

(610mm)

(559mm)

SUPPLIES

1-1/4 O.D.

WASTE

1-1/4 O.D.

TAILPIECE

(203mm)

Summary of content (4 pages)

PAGE 1
THE “ ” COLLECTION ® by ASSEMBLY & INSTALLATION INSTRUCTIONS ® CONSOLE TABLE 7483.002 7483.295 Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
PAGE 2
1A 1B 6, 7 5 2 3 Threaded Rod Remove lower leg support / adjustable foot assembly (items 2 & 3) from accessories box and screw them completely onto the 4 threaded rods (item 5). Unscrew the 2 front leg trumpets (item 6) and 2 rear leg trumpets (item 7) from the threaded rod (item 5). 2 4 6 Front 1 Threaded Rod Slide Shelf Support (item #1) onto 4 leg subassemblies. Slide the 4 Upper Legs (item #4) onto the Threaded Rods from the 4 leg subassemblies as shown.
PAGE 3
2 HANGER *C/L OF HANGER ANCHORING SLOTS 36" C/L 30-3/4" MOUNTING SCREW HOLES (4) HOLES FOR ANCHOR SCREWS IN BACK DRAPERY POSITIONING SCREW SLOTS (2) SUPPLIES AS REQUIRED WASTE FINISHED FLOOR Fig. 2 Fig. 1 Position hanger according to Step 1, making sure its center is aligned with the waste hole centerline (Fig. 1). Mark the hanger screw locations through its mounting holes. Drill pilot holes in positioning screw slots of hanger (Fig. 2). 3 We recommend using two people for installation.
PAGE 4
8 12 10 13 9 8710 CONSOLE TABLE LEGS COMPONENTS LIST 7 6 4 5 1 Note: "XXX" represents color or trim finish options. Specify when ordering. ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. PACKED QTY.