Installation Guide

Perimeter

of template

Perimeter

of template

Using the template provided,locate the position of the lavatory. Provide proper clearance under the

countertop for the faucet supply lines, drain assembly and the structural parts of the cabinet.

NOTE: If replacing an existing lavatory be certain to shut off water supply before removing old lavatory.

730524-100 Rev. B

- 1 -

Product names listed herein are trademarks of AS America, Inc.

ASSEMBLY & INSTALLATION

INSTRUCTIONS

0293 Series

COUNTERTOP SINK

Adjustable Wrench

Channel Lock Pliers

Regular Screwdriver

Recommended Tools & Materials

Phillips Screwdriver

10'

Pipe Wrench

Putty Knife

Drill

Saber Saw

Basin Wrench

Plumbers' Putty

or Caulking

Tubing Cutter

Tape Measure

Hacksaw

Level

Thank you for selecting our products...products which have

been the benchmarks of fine quality for over 100 years. To help

insure that the installation process will proceed smoothly,

please read these instructions carefully before you begin. Also,

review the recommended tools and materials list; carefully

unpack and examine your new plumbing fixture.

Cut opening around the

perimeter of the template.

Drill a clearance hole inside the

perimeter line of the template.

PAGE 1
ASSEMBLY & INSTALLATION INSTRUCTIONS COUNTERTOP SINK 0293 Series Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
PAGE 2
3 5 After checking fit and alignment, turn lavatory upside down and apply a generous portion of sealant around the underside of the rim near the edge. Carefully lower lavatory in place, align with marks made earlier, and press down firmly. Allow sealant to set before connecting supplies and drain. A 6 Mount the faucet and drain assembly (not included) on the lavatory following faucet manufacturer's instructions.