Specification

J72
BARRIER FREE
© 2010 AS America Inc.
STUDIO™ CARRÉ UNDERCOUNTER SINK
• Square undercounter mount sink
• Made from vitreous china
• Customizable overow position
• Supplied with mounting kit (7301442-0070A)
and template
❏ 0426.000
405 x 405mm
(16" x 16")
Bowl size:
344mm (13-1/2") wide
344mm (13-1/2") front to back
121mm (4-3/4") deep
Compliance Certications -
Meets or Exceeds the
Following Specications:
• ASME A112.19.2 / CSA B45.1
STUDIO™ CARRÉ
UNDERCOUNTER SINK
VITREOUS CHINA
To Be Specied:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME A112.19.2 / CSA B45.1.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
51mm (2) MIN.
65mm
(2-1/2")
405mm
(16")
405mm
(16")
344mm
(13-1/2")
344mm
(13-1/2")
FINISHED
WALL OR
BACKSPLASH
EDGE OF
COUNTERTOP
CUTOUT
31mm
(1-1/4)
DETAIL OF MOUNTING CLIP
(KIT No. 7301442-0070A)
LAVA
BRASS
INSERT
19mm
(3/4) MIN.
REFER TO INSTALLATION INSTRUCTIONS
CLIP
MACH. SCREW
1-1/4" O.D.
TAILPIECE
1-1/4" O.D.
WASTE
203mm
(8")
38mm
(1-1/2")
329mm
(13")
273mm
(10-3/4")
172mm
(6-3/4")
14mm
(1/2")
SUPPLIES
AS REQ'D.
ADA DRAIN
OUTLET
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
864mm
(34")
279mm
(11")
FINISHED FLOOR
14mm
(1/2")
102mm
(ø-1/4")
32mm
(4")
203mm
(8")
*
To comply with ADA standards,
overflow hole must face back.
153mm
(6")
686mm
(27")
610mm
(24")
105mm
(4-1/8")
864mm
(34")
BARRIER FREE
CLEARANCE
202mm
(8")
229mm
(9")
MIN.
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 ACCESSIBLE AND
USABLE BUILDINGS AND FACILITIES -
CHECK LOCAL CODES.
Countertop 864mm (34") from finished floor. Lavatory
installed 102mm (4") from front edge of countertop.
Countertop thickness to be 25mm (1") maximum.
Revised 7/09