Specification

L3
© 2017 AS America Inc.
spec_0445-EdgemereConsole 4/17
EDGEMERE
®
COLLECTION
CONSOLE TABLE
METAL
EDGEMERE
®
COLLECTION CONSOLE TABLE
•Cleantransitionaldesignthatopensupasmall 
  bathroomwithoutsacricingstorage
 •Featuresatempered-glassshelfforstorageand 
  fronttowelbar
 •CanbepairedwithanyEdgemereSinkTopavailablein
  8"(203mm)centers,4"(102mm)centers,orsinglehole
 •LegsavailableinChromeorBrushedNickel
Separate Components:
❏ 0445.008 SinkTop8"(203mm)centers
❏ 0445.004RSinktop4"(102mm)centers
❏ 0445.001SinkTopSingleHoleOnly
❏ 8719.000.002Consoletablelegs(Chrome)
❏ 8719.000R.295Consoletablelegs(BrushedNickel)
❏ 7720.018.002 DecorativeP-Trap(Chrome)
❏ 7720.018.295DecorativeP-Trap(BrushedNickel)
Nominal Dimensions with Sink:
17-1/2" x 25" x 35-11/16"
(444 x 634 x 906mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.9MforNon-Vitreous
CeramicFixtures
•CAN/CSAB45Series
To Be Specied:
❏ Color:
❏PedestalTop:Whiteonly
❏ConsoleTableLegs:
 002Chromeor295BrushedNickel
NOTES:
*
DIMENSIONSSHOWNFORLOCATIONOFSUPPLIESAND“P”TRAP
ARESUGGESTED.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.
INSTALLATIONINSTRUCTIONSSUPPLIEDWITHLAVATORY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithinthe
rangeoftolerancesestablishedbyANSIStandardA112.19.9M.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibility
isassumedforuseofsupersededorvoidedpages.
FINISHED
FLOOR
FOR
ANCHOR
SCREW
MOUNT
FINISHED
WALL
FINISHED
WALL
906mm
(35-11/16")
496mm
(19-1/2")
112mm
(4-7/16")
160mm
(6-5/16")
40mm
(1-9/16")
545mm
(21-1/2")
213mm
(8-3/8")
775mm
(30-1/2")
710mm
(28")
866mm
(34-1/16")
207mm
(8-1/8")
622mm
(24-1/2")
634mm
(25")
102mm
(4")
444mm
(17-1/2")
514mm
(20-1/4")
140mm
(5-1/2")