Technical Specifications

© 2008 AS America Inc.
BOULEVARD™ UNDERCOUNTER SINK
• Rectangular under mount sink with unique
tapered interior bowl
• Made from vitreous china
• Unglazed rim
• Front overow
• Supplied with mounting kit (047194-0070A)
and template
❏ 0610.000 Unglazed Rim
514 x 406mm
(20-1/4" x 16")
❏ 0610.300 Glazed underside
Bowl Size:
432mm (17") wide
330mm (13") front to back
152mm (6") deep
Compliance Certications -
Meets or Exceeds the
Following Specications:
• ASME A112.19.2M for
Vitreous China Fixtures
• CAN/CSA B45 series
BOULEVARD™
UNDERCOUNTER SINK
VITREOUS CHINA
To Be Specied:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
WE RECOMMEND USING BASIN AS A TEMPLATE TO DETERMINE
PROPER CONTOUR. CUT COUNTERTOP 38MM (1-1/2") INSIDE BASIN
CONTOUR.
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE
SUGGESTED.
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
51mm
(2) MIN.
71mm
(2-13/16)
FINISHED WALL
OR SPLASHBACK
203mm
(8)
EDGE OF
COUNTER
TOP
CUTOUT
A
B
40mm
(1-9/16)
514mm
(20-1/4)
406mm
(16)
DETAIL OF MOUNTING CLIP
(KIT No.47194.0070A)
LAVA
BRASS
INSERT
19mm
(3/4) MIN.
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
CLIP
MACH.
SCREW
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
203mm
(8)
330mm
(13)
273mm
(10-3/4)
11mm
(7/16)
203mm
(8)
SUPPLIES
AS REQ'D.
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
864mm
(34)
*
*
FINISHED FLOOR
27mm
(1-1/16)
FITTING
CENTERSET
SPREAD
A
27mm(1-1/16)
32mm(1-1/4)
B
102mm(4)
203mm(8)
432mm
(17)
330mm
(13)
Revised 2/08
J47