Use and Care Manual

J27
BARRIER FREE
© 2008 AS America Inc.
TOWN SQUARE
®
COUNTERTOP SINK
FIRECLAY
TOWN SQUARE
®
COUNTERTOP SINK
American classic design
Clean, straight lines with classic ogee curves
Tapered interior bowl with at bottom design
provides dramatic look
Made from ne reclay
Self-rimming with cutout template supplied
Front overow
0700.004 Faucet holes on 4" (203mm) centers
(illustrated)
0700.008 Faucet holes on 8" (102mm) centers
0700.001 Center hole only
Nominal Dimensions:
23-1/8" x 18-3/4"
(587 x 476mm)
Bowl sizes:
18-1/2" (470mm) wide
10-1/2" (267mm) front to back
6-1/4" (159mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 series
To Be Specied:
Color: White Bone Linen Black
Town Square Faucet:
Centerset Sink Faucet: 2555.201 (shown)
Widespread Sink Faucet: 2555.801
Other Sink Faucet*:
Faucet Finish:
Supplies:
1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Revised 2/08
4"
(102mm)
9-3/4"
(248mm)
18-3/4"
(476mm)
23-1/8"
(587mm)
FINISHED WALL
OR SPLASHBACK
8"
(203mm)
31"
(787mm)
SUGGESTED
1-1/4" O.D. TAILPIECE
1-1/4" O.D. WASTE
FINISHED FLOOR
*
10-3/4"
(273mm)
*
12-7/8"
(327mm)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
1"
(25mm)
8-1/8"
(206mm)
OPTIONAL
SUPPLIES
AS REQ'D
1-3/4" DIA.
STD. DRAIN
OUTLET
2-7/8"
(73mm)

Summary of content (1 pages)