Specification

F125

MODEL NUMBER:

1660.611 FloWise

Modern

Water Saving Showerhead Only

GENERAL DESCRIPTION:

Showerhead uses 40% less water than standard 2.5gpm

showerheads. Showerhead rated at 1.5gpm/5.7L/min.

maximum flow rate. Showerhead has single spray function

using Turbine Technology. Pressure compensating flow

control device.

PRODUCT FEATURES:

Water Saving: Saves 40% in water usage.

Pressure Compensating Flow Control Device:

Provides consistent flow over a wide pressure range.

Single Function: Showerhead provides drenching spray

for full coverage of the user.

Easy Clean Spray Nozzles: Easily clean lime and

calcium build up. Nozzles will not clog.

SUGGESTED SPECIFICATION

Showerhead shall save 40% in water usage. Showerhead shall always start at 1.5gpm/5.7L/min. Showerhead shall have a

pressure compensating control device. Fitting shall be American Standard Model # 1660.611.___.

1/2" NPT

81mm

(3-3/16")

64mm

(2-1/2")

Revised 2/12

FLOWISE

MODERN WATER SAVING SHOWERHEAD

PAGE 1
FLOWISE® MODERN WATER SAVING SHOWERHEAD MODEL NUMBER: 1660.611 FloWise® Modern Water Saving Showerhead Only 1/2" NPT 81mm (3-3/16") 64mm (2-1/2") GENERAL DESCRIPTION: PRODUCT FEATURES: Showerhead uses 40% less water than standard 2.5gpm showerheads. Showerhead rated at 1.5gpm/5.7L/min. maximum flow rate. Showerhead has single spray function using Turbine Technology. Pressure compensating flow control device. Water Saving: Saves 40% in water usage.
PAGE 2
FLOWISE® MODERN WATER SAVING SHOWERHEAD CODES AND STANDARDS FLOW RATE GALLONS PER MINUTE 3.0 These products meet or exceed the following codes and standards: ASME A112.18.1 CSA 125.1 2.5 2.0 1.5 1.0 0.5 0 20 40 60 80 100 INLET PRESSURE (PSI) Finish Options Product Number Description 1660.611 FloWise® Modern Water Saving Showerhead Only. Polished Chrome PVD Satin Nickel 002 295 Showerhead Accessories Product Number Description 1660.240 Standard Shower Arm and Flange 1660.