Installation Guide

SERIN™ SHOWER SYSTEM
Installation
Instructions
Certified to comply with ANSI A112.18.1
2064.724
Recommended Tools & Materials
ROUGHING-IN DIMENSIONS
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Electric Drill
10mm (3/8)
Drill Bit
Pencil
Phillips Screwdriver
76mm
(3)
FINISHED WALL
95mm
(3-3/4)
54mm
(2-1/8)
38mm
(1-1/2)
19mm
(3/4)
33.5mm
(1-3/16D.)
96mm
(3-3/4)
41mm
(1-5/8)
586-595mm
(23-1/8, 23/3/8)
620mm
(24-3/8)
FINISHED FLOOR
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
915mm
(36)
1219mm
(48)
TO
Hammer
32mm
(1-1/4)
13mm
(1/2)
1/2" NPT
RUBBER GASKET
FINISHED
WALL
1/2" NPSM HOSE
CONNECTION
53mm
(2-1/16)
60mm
(2-3/8")
25mm
(1")
1/2" NPSM
151mm
(6")
203mm
(8")
65mm
(2-1/2")
(48" - 60") (OPTIONAL)
TO FINISHED FLOOR
59"
Teflon TapeLevel
1
Turn off hot and cold water
supplies before beginning.
CAUTION
INSTALL WALL SUPPLY
1/2" NPT
APPLY SEALANT
OR TEFLON TAPE
1
Supply to WALL SUPPLY (1) is 1/2" NPT. See rough-in above for detailed information.
Install RUBBER SEAL (2) onto WALL SUPPLY (1).
Apply sealant or teflon tape to threads of 1/2" NPT supply nipple. Thread WALL SUPPLY (1)
onto supply nipple making a water tight seal. WALL SUPPLY (1) with RUBBER SEAL (2)
should be tight against finished wall.
2
M968927 Rev.1.3