Princeton Bath Installation Instructions

*
1527mm
(60-1/8)
762mm
(30)
TUB WIDTH
LEVELING SUPPORT
STRINGER 51 x 102mm
(2 X 4)
Note recess is 1527 x 813mm (60-1/8 x 32). Cut a 229 x 305mm (9 x 12) hole in sub
floor for drain, centered 362mm (14-1/4) as shown for below floor rough. Locate studs
as required, then ensure rough opening dimensions are proper and supports are plumb
and square.
*Install stringer as shown (346mm [13-5/8] for through the floor drain or
435mm [17-1/8] for above the floor drain.)
362mm
(14-1/4)
229 x 305mm
(9 x 12) FLOOR
CUTOUT
FOR DRAIN
813mm
(32)
Princeton™ Bath
w/Integral Overflow
Installation Instructions
Introduction:
FRAMING INSTRUCTIONS
Thank you for selecting American-Standard...products which
have been the benchmarks of fine quality for over 100 years. To help insure
that the installation process will proceed smoothly, please read these
instructions carefully before you begin. Also carefully unpack and examine your
new plumbing fixture.
2390.202.ICH
2392.202.ICH
2391.202.ICH
2393.202.ICH
2390.202.IPB
2392.202.IPB
2391.202.IPB
2393.202.IPB
Observe Local Plumbing and Building Codes
LEFT HAND TUB ILLUSTRATED
RIGHT TUB IS REVERSED
5
1
791174-100 Rev. G
The Drain Assembly is enclosed with tub models
listed above-locate and retain for tub installation
before discarding tub carton
IMPORTANT
1524mm
(60)
762mm
(30)
FINISHED
WALL
19mm
(3/4)
FINISHED
WALL
FULL LENGTH
SUPPORT STRINGER
OUTLINE OF
SKID PATTERN
197mm
(7-3/4)
9 x 12
HOLE IN SUB-FLOOR
PROVIDE FULL
LENGTH SUPPORT
STRINGER
AT THIS POINT
362mm
(14-1/4)
48mm
(1-7/8)
346mm
(13-5/8)
60mm
(2-3/8)
89mm
(3-1/2)
ROUGHING-IN
1-1/2 N.P.S.M.
THREADS
1-1/2 TUBING
THREAD INSIDE
ROUGH
FLOOR
445mm
(17-1/2)
PROVIDE FULL
LENGTH SUPPORT
STRINGER
AT THIS POINT
435mm
(17-1/8)
DRAIN
SHOE
© American Standard Inc. 2003
FOR AFTER-SALES SERVICE CALL 1 [phone] WEEKDAYS.
BELOW FLOOR ROUGH
2390.202 ICH
2391.202 ICH
ABOVE FLOOR ROUGH
2392.202 ICH
2393.202 ICH
356mm
(14)
ROUGH
FLOOR