Dimensions Guide

H69
© 2006 American Standard Inc.
Revised 3/06
Components Required:
Bath Filler*: (specify  nish)
Bath Drain: 1599.205.XXX (specify color)
Custom Accessories Available:
E-Z-Install™ Whirlpool Heater - EZHEAT-100
For color/ nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain
water temperature during operation. It will not heat cold water
to desired bathing temperature.
EVOLUTION™ 5' X 32" IA-LHO / RHO
Comfortable bathing design with form- tted
backrest and molded-in armrests
2425V-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)
2425V-RHO Built-In Integral Apron
Right Hand Drain Outlet (specify color)
Acrylic with  berglass reinforcement
Integral apron with removable access panel
Integral three-sided, tiling / water retention
a n g e
1.4 HP self-draining pump/motor
Eight  ow adjustable jets including:
- Two adjustable Comfort Jets™ Hi Flo
- Six adjustable Comfort Jets
Two silent air volume controls
Side-mounted On/Off control
Deep Soak Over ow Drain for maximum
water depth
Complete factory installed and tested
whirlpool system
2425VC-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)
2425VC-RHO Built-In Integral Apron
Right Hand Drain Outlet (specify color)
Same as above with the EverClean
whirlpool system featuring Antimicrobial
AlphaSan
®
Nominal Dimensions:
60" x 32" x 21-1/2"
(1524 x 813 x 546mm)
Compliance Certi cations -
Meets or Exceeds the Following Speci cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
* See American Standard Faucet Selector
EVOLUTION™ 5' X 32" IA-LHO / RHO
BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC

Summary of content (2 pages)