Installation Guide

1
M965653 Rev. 1.4 (10/15)
All American Standard Faucets Are Water Tested At Our Factory.
Some Residual Water May Remain In The Faucet During Shipping.
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly--please read these instructions carefully before you begin.
UNPACKING
The illustration below shows the fitting and all loose items after they have been removed from the carton.
Some items may be packaged partially assembled to other items.
1. Installation Instructions
2. Spout Assembly
3. Mounting Kit
4. Control Box
5. Supply Hose
6a. DC Long Life Power Pack
6b. DC Standard Battery
6c. AC Plug-In Power Supply
6d. AC Hard-Wire Power Transfomer
7. Y-Adapter
8. 27" Extension Cable
9. 10 ft. Extension
10. 4" Deck plate (optional, must be ordered separately)
11. 8" Deck plate (optional, must be ordered separately)
12. Mixing Valve (optional, must be ordered separately)
13. Control Box Cover Screws
2
1
5
3
4
MODEL NUMBER:
2506.192 with cast spout, 1.5 GPM
vandal resistant aerator.
2506.195 with cast spout, 0.5 GPM
vandal resistant aerator
DO NOT REMOVE
PROTECTIVE
FILM FROM
SENSOR EYE UNTIL
INSTALLATION IS
COMPLETE.
© 2007 American Standard
CAUTION: Use only American Standard
supplied cable sets. Using non-AS supplied
cables, or cutting, splicing or modifying any
components will void the warranty.
Installation Instructions
Ins tall atio n In structi ons
Certified to comply with ASME A112.18.1
© 2015 American Standard
NOTE TO INSTALLER: Please give this manual to the customer after installation.NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Selectronic
®
Products visit our website at: www.americanstandard-us.com
or e-mail us at: CRTTEAM@americanstandard.com
For Parts, Service, Warranty or other Assistance,
please call (844) CRT-TEAM / (844) 278-8326 (In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-306-1093)
SELECTRONIC
®
Moments
Proximity Faucets
Product No.'s & Options
Specifications
Faucet Installation
Electrical Installation
Start-up / Maintenance
FAQ’s / Troubleshooting
Parts
1
2
2-3
4-6
7-8
8-9
10
MODEL NUMBERS
2506.1X2 2506.1X3 2506.1X5
How to order the Selectronic Product
1. Choose Power Supply
• Single Hole Sink
• Single Inlet
• 1 and 3 Hole Sinks
• Single Inlet
• 1 and 3 Hole Sinks
• Hot and Cold Inlets
Base Product Deck Plate (optional) Mixing Valve (optional)
605P400
605P800
605XTMV
10
11
12
Deck Plate
Mixing Valve
Base Product
9
7
6d
7
8
6c
6b
DC Standard
Battery
2506.15X
AC Plug-in
2506.16X
AC Hardwire
2506.18X
AC Multi
2506.17X
DC Long Life
Power Pack
2506.14X
6a
88
8
8
13