Installation Guide

M965653 Rev. 1.4 (10/15)
4
1. Remove CONTROL BOX COVER (1). Fig. 1.
2. Feed the 27" EXTENSION CABLES (2) through the
top of CONTROL BOX (3). Fig. 1a.
FOR STANDARD BATTERY VERSION ONLY
3. Insert BATTERY (4) into BATTERY HOLDER (5),
make sure the shape of the BATTERY (4) follows the
shape of the BATTERY HOLDER (5) and terminal
end is inserted first. Fig. 1b.
4. Insert the BATTERY CONNECTOR (5a) from the
Standard Battery or Long Life Power Pack through
side GROMMET (6) as shown. Fig. 1c.
5. Connect SOLENOID CABLE (7) and BATTERY
CONNECTOR (5a) to 27" EXTENSION CABLES (2).
Place Standard Battery or Long Life Power Pack into
housing. Fig. 1d.
6. Replace CONTROL BOX COVER (1). Tighten cover
screws firmly.
DC VERSIONS (LONG LIFE POWER
PACK & STANDARD BATTERY); Fig. 1
Product Page
DC Long Life Power Pack
(6053.193)
4
DC Standard Battery
(6055.193)
4
AC Plug-in
(6056.193)
5
AC Hardwire
(6059.193)
5
AC Multi Hook-up
(6057.193)
6
A
Fig. 1a
Fig. 1b
Fig. 1
2
3
1
4
5
INSTALL BATTERY
CR-P2
5a
5
CAUTION: Use only American Standard supplied
cable sets. Using non-AS supplied cables, or
cutting, splicing or modifying any components will
void the warranty.
ELECTRICAL INSTALLATION
Fig. 1c
7
2
STANDARD
BATTERY
LONG LIFE
POWER PACK
5a
5a
6
STANDARD
BATTERY
LONG LIFE
POWER PACK
Fig. 1d
5a