Specification

HD-40
© 2014 AS America Inc.
CHAMPION
®
CLASSIC 5' x 36"
AIR BATH
HIGH GLOSS
Rev. 8/14
END VIEW
DRAIN/
OVERFLOW
11"
(279mm)
3-1/4"
(83mm)
21-1/2"
(546mm)
20"
(528mm)
20-1/8"
(511mm)
60"
(1524mm)
36"
(914mm)
6"
(152mm)
11"
(279mm)
3-1/4"
(83mm)
3"
(76mm)
13-3/4"
(349mm)
7-1/2"
(191mm)
CUT OUT IN FLOOR
FOR DRAIN
GENERAL SPECIFICATIONS FOR 2771.068CH AIR BATH
AIR BATH ELECTRICAL SPECIFICATIONS
BLOWER 1.0 HP, 10 AMPS,120V.
60 x 36 x 21-1/2 (1524 x 914 x 546mm)
75 Lbs. (34 Kgs.)
800 Lbs. (363 Kgs.)
87 Gal. (329 L)
41-1/4 x 26-1/4 In. (1048 x 667mm)
52-1/2 x 30 In.(1334 x 762mm)
18-1/2 In. (470mm)
53 Lbs./Sq.Ft. (260 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
Air Bath Shown
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF
BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH AIRBATH FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT No. 751755-100 AND APRON No. 9261.019 AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1.2 AND A112.19.7